Babushka Doll Peg Bag

This was my Christmas present to my mum. I was inspired by this pin, which I thought was really cute but although I thought my mum would like it, I didn't think she'd LOVE it and I couldn't help but think that I could probably make one shaped like a Russian Doll, and my mum LOVES Russian Dolls, so I had to try! (Sorry for the lack of photos, I didn't start taking them until I had all the pieces ready)

Materials
Main fabric
Lining fabric
Filler fabric
Wire coat hanger
Felt (face colour and hair colour)
Embroidery thread (for face details - I used black and red)
Paper for making the pattern (I used newspaper)

To make the pattern I just drew round a cereal bowl for the head and then drew the body freehand. When I cut it out I folded it in half length-ways to make sure it was symmetrical. Now that I have finished it, I think it would actually be better bigger. It turned out smaller than I'd intended even though I put in generous seam allowances so I would suggest making it even bigger (my pattern measured about 39cm by 27cm).

From the pattern I cut out 2 pieces of the main fabric, 2 pieces of lining fabric and 2 pieces of another stiff fabric I had for strengthening (you could use any spare fabric or interfacing or batting for this, it's just to give it a bit more bulk and help it to hold it's shape when it is hung).

I then cut the top off my pattern in a kind of extended 'w' shape to make the pattern for the headscarf (see photo below) and cut one of these from another fabric. I hemmed the bottom of this (the 'w' shaped bit) as this would not be sewn to the main piece.

I cut a circle from some skin coloured felt, sewed on some felt hair and embroidered a face on it. After testing out a few faces on paper I decided on a very simple closed eyes and a small smiling mouth. Anything more looked a bit silly but you might be able to pull it off if you're better at drawing and embroidering than me!

Once the face was done, I sewed it onto my scarf fabric (I centered the face at this point but it did end up a bit wonky by the end so you could leave the face until the very end and sew it on there to make sure it is in the right place (or you could be better than me at sewing even hems...).

I pinned pieces for the front of the bag together (lining fabric, then filler fabric, then main fabric then scarf) and cut the slot for the pegs. I then hemmed this. You can add binding but I decided I liked mine as it was and with the stripy fabric I thought binding wouldn't look good.

Next, I layered up the back of the bag (lining, filler and main fabric) and sewed together the front and the back, right sides facing. Start and end at the top of the head and leave a small opening for the hanger to go through. I then used pinking shears to trim the hem to stop it fraying. Turn the bag right way out through the peg slot.

Finally, cut a wire hanger and bend it to shape so that it will go round the edge of the head and shoulders of your bag inside, then just slip it inside through the peg slot and you have a Babushka Peg Bag!

Also, my mum did LOVE it!